Tacky Booth Coating 2769 is a very tacky, white water-based paint spray booth wall masking designed to be removed by scraping or cold water spray. This product is used to protect booth walls and center track conveyor covers from paint overspray. It substantially reduces the amount of time necessary to remove paint overspray. It also reduces the amount of paint strippers that may be used in booth cleaning operations.

Tacky Booth Coating 2769 is bright white and light reflective to maximize booth illumination. The masking remains very tacky and moist, making it especially suited for modular paint booths and robotic painting operations. It is readily removed with low to moderate pressure, water spray or manual scraping.

Tacky Booth Coating 2769 is designed for water spray booths. For dry booths, please refer to our peelable coatings at www.strippablecoating.com.

Tacky Booth Coating 2769 can be applied by brush, spray or roller. It is used as received, no dilution is needed.
Tacky Booth Coating 2769 can be applied with airless spray equipment. When applying material over a large area, a 30:1 ratio airless spray unit with a 0.035” fluid orifice in the spray gun will provide good results.

Airless equipment can be extremely hazardous. It is recommended that all precautionary information regarding the operation of an airless gun be read, understood, and followed.

The surface to be coated should be clean and relatively dry for best adhesion of the coating.

Tacky Booth Coating 2769 should be sprayed in a uniform film of 10-mils to 15-mils wet thickness.

Tacky Booth Coating 2769 is readily removed with cold or hot water at low to moderate spray pressure or by manual scraping.

Tacky Booth Coating 2769 must be protected from freezing.

 Water base
 Scrapable
 Low VOC
 Excellent tack
 User friendly