Booth Coating 1780 is a water based, fast drying, coating that has been formulated with special resins to provide a hard, clear barrier. It is used to protect paint booth grates, floors and walls. BC-1780 is an effective barrier for most paints, adhesives, waxes, greases and oils.
TYPICAL PROPERTIES: Clear Paint Booth Coating, Protective Barrier Spray Booth Grates
Appearance: Clear to slightly translucent liquid with a mild odor.
Specific Gravity: 1.01 – 1.02
Flash Point: None to boiling (Pensky-Martens)
VOC: 0 lbs/gal
pH: 9.4 – 9.9
Viscosity: 1,500 – 3,000 cps
BC-1780 can be sprayed or applied by brush or roller. A coating of 3 to 6 wet mils is usually sufficient to give protection against most paints and adhesives. Drying time is 0.5 to 1.0 hour depending on the atmospheric conditions at the time of application. BC-1780 is easily removed with a stream of water. Increasing water pressure facilitates removal as does soaking with water before spraying.
Water based and water rinse-able
Provides a clear, hard film
Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.