GOLD GREASE 4550 has been formulated for application to baffles, back sections, stacks, underbooth areas and other locations where a greasy coating is desired to prevent adhesion of paint overspray. It is water resistant and has good adhesion to vertical surfaces.
TYPICAL PROPERTIES: Gold Grease Spray Booth Coating, protective Barrier For Paint Booth, Baffle Coating
Appearance: Thick, gold grease
Grease Penetration: 35 – 37.5 mm
Specific Gravity: 0.89 – 0.91
GOLD GREASE 4550 can be applied by 30:1 airless spray, brush, roll or trowel.
Facilitates easier future clean-outs
Easily removed by scraping
Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.