Booth White Grease 4568 White is a grease type product that has been formulated for application to baffles, back sections, stacks, under booth areas, booth walls and other locations where a greasy coating is desired to prevent adhesion of paint overspray. It is water resistant, has good adhesion to vertical surfaces and provides a light reflective white coating to lighten up paint booths.
Benefits To You:
Facilitates easier future clean outs
Easily removed by scraping
Provides a bright, white coating to lighten paint booths
Low VOC content
For best results, the area in which the material is to be applied should be clean and dry.
Booth White Grease 4568 White can be applied as received with a trowel or by airless spray. A film thickness of 10 to 15 mils is suggested.
When using airless spray, the material is applied using approximately 4,000 PSIG and a gun with a 0.027 inch orifice. CAUTION: Airless spray equipment can be extremely hazardous. It is recommended that all precautionary information regarding its operation be read, understood and followed.
The bulk of the material can be removed mechanically by scraping with a wood or plastic device which will not be harmful to the underlying surface. Thinner films of the material can be removed with a solvent such as mineral spirits.
Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer’s and seller’s sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.