Protective Booth Coatings – In the paint spray booth itself, as production painting proceeds hour after hour, shift after shift, the floor grates therein accumulate large undesired buildups of paint spray that falls thereon, which excess paint must be periodically removed, to maintain the efficiency of the excess paint spray removal process, and the paint spray booth operation itself.
Description: Another problem associated with removal of excess paint spray from plant production paint spray booths is the fact that some manufacturers use high solids enamel paint compositions that retain their “live”, sticky paint characteristics as the excess paint is carried down in the air/water disposal system. These high-solids enamel paints continue to be sticky on the grate-block surfaces, and are not “deadened” by additives to paint spray booth disposal water systems. Such enamel paints accumulate even more rapidly on the grate floors than some of the older acrylic lacquer paints which dry faster. Even more frequent cleaning is thus required.
|BOOTH COATING 1780||Provides a clear, hard, water rinsable coating|
|GRATE COATING 1775||Provides a white, hard, non-chalking, water rinsable coating|
BC 2788 is a water based fast drying white coating. water based fast drying white hard coating, protective paint booth coating, water washable,water rinseable, grate coating, nonchalking
white hard coating, temporary paint booth coating, protective paint booth coating, water based, water washable, water rinseable, grate coating, nonchalking
Appearance: White, viscous liquid
Viscosity: 5,000 – 10,000 cps
Specific Gravity: 1.04 – 1.06
Flash Point: N/E
pH: 8 – 9
BC 2788 can be sprayed, brushed, or rolled onto the surface to be coated. A coating of 1-2 mils is usually sufficient to give protection against most paints and adhesives. Drying time is 0.5 to 1.0 hour depending on the atmospheric conditions at the time of application. GC 1775 is easily removed with a stream of water. Increasing water pressure facilitates removal as does soaking with water before spraying.
Note: The above information and recommendations concerning this product are based upon our laboratory tests and field use experience with this or similar products. However, since conditions of actual use are beyond our control, any recommendations or suggestions are made without warranty, express or implied. Manufacturer's and seller's sole obligation shall be to replace that portion of the product shown to be defective. Neither shall be liable for any loss, damage, or injury, direct or consequential, arising out of the use of this product. The information presented herein is our interpretation of certain test results and field experience to date. This information is not to be taken as warranty or representation for which we assume legal responsibility, nor as permission or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation and verification.